 |
Backhoe Loader
Same Hydraulic System as Excavators
The new CBL40 is a compact backhoe loader powered by a 3-cylinder Tier II compliant 37.2-hp turbo-diesel engine. It has a digging depth of 10 ft, backhoe reach of 13 ft, 2 in. and a loader lift height of 9 ft, 6 in. The CBL40 has the same hydraulic system used in the manufacturer�s excavators. This provides a smooth, precise and speedy control in backhoe operation. In addition, the loader bucket is self leveling and is equipped with a standard quick coupler. Yanmar America Corp.; 770/877-9894; www.yanmar.com
 |
Utility Work Truck
New Attachments
Utility Work Truck: New Attachments New options and enhancements to the Toolcat 5600 utility work machine include four new approved attachments, hydraulic and power take-off kits as well as an enhanced drive system. The additional four attachments are the Brushcat rotary cutter, sweeper, landscape rake and combination bucket. The machine also features enhanced lifting capabilities and load leveling. Bobcat Co.; 866/823-7898; www.bobcat.com/RR5600C
 |
Vibration Asphalt
Double-Drum Drive
The Stone WolfPac 4100 is an all-new 40-in.-wide asphalt roller with double-drum drive and vibration with 4,000 lb of impact per drum. It is designed for confined-area asphalt compaction of base, binder and finish coats. The roller features an exclusive design that allows the operator to direct the vibration to both drums, the front, or the rear. A specially designed electro-hydraulic circuit combined with a custom-designed manifold allows operators to activate the vibration when needed. Stone Construction Equipment Inc.; 585/229-5141; www.stone-equip.com
 |
Excavator
Independent Outrigger Control
The A 900 C Litronic is the manufacturers newest wheeled excavator in the U.S. model line, with an operating weight between 35,300 lb and 40,300 lb. It is fitted with a Liebherr D 924 TI-E four-cylinder in-line diesel engine rated at 120 hp with direct injection, turbocharger and charge-air intercooler. The undercarriage is available in two versionsa four-point outrigger configuration or a blade and outrigger combination. Both feature independent outrigger control. Liebherr; 757/245-5251; www.liebherr.com
 |
Blade Option
New Bolt-On Design
Manufacturer offers a new option for its PC35MR-2 compact hydraulic excavator. The new power angle (PA) blade is designed to help increase the excavator�s productivity when backfilling trenches, the maker says. In addition, the standard bolt-on cutting edge blade can be replaced very easily because of its bolt-on design. The blade is 6 ft, 7 in. wide and allows the user to angle it 25� to the right or left when in use. Komatsu America Corp.; www.komatsuamerica.com 866/513-5778
Post a comment to this article
Report Abusive Comment