This week we look at a skid steer loader from Mustang and a stand-up decking tool from Hilti. Click to begin the slide show.
Product Snapshot: Skid Steer Loader and Decking Tool
The Mustang 1650R Skid Steer Loader is powered by a 69.9-hp Yanmar engine that meets Tier 4 emissions standards. It has a rated operating capacity of 1,650 lb, which can be boosted to 1,800 lb when using an optional counterweight. A new auxiliary hydraulic design allows for flow rates of up to 18.9 gpm. It has a maximum lift height of 119 in. and an operating weight of 6,165 lb. The 1650R's cab-forward design and lowered rear towers provide greater visibility.
Mustang; www.mustangmfg.com
The Cat M320F Wheel Loader has a maximum operating weight of 23.2 tons. It is powered by a Tier 4 C7.1 Acert engine rated at 169 hp. The redesigned cab features an interior sound level of only 71 db(a) and reduced vibration levels. The control console now has an adjustable steering wheel and an integrated safety level. The wheel loader's halogen lights have been replaced with LED lamps for lower power usage. The M320F has an electronically controlled hydraulic system and medium-pressure pumps to reduce engine load.
Caterpillar; www.cat.com
The SDT 5 Stand-Up Decking Tool System can attach metal deck to thin steel supports as well as metal-deck sidelap connectors. It is compatible with Hilti Racing Tip No. 5 Point Screws and Sidelap Connectors.
Hilti; www.hilti.us
The LT6-Series Light Tower has four 1,000-watt metal halide lamps mounted on a 30-ft mast that is able to rotate 360�. The lights are powered by a three-cylinder Kohler diesel engine that can run 66 hours on a single tank of fuel. The tower's 6,000-watt generator also can power small tools on the jobsite.
Multiquip; www.multiquip.com
Post a comment to this article
Report Abusive Comment