Products Snapshot
E-Z Drill Model 210 Equipment-Mounted Concrete Drill Attachments are compatible with most models of backhoes and excavators. The pneumatic drills are designed for full-depth road repair and patching. The drills are available in three-gang, four-gang and five gang models. The units are capable of drilling 5/8 to 2 1/2 in. dia. holes at a depth of 18 in. The drill rig has side-shift control which allows for the drill position to be adjusted independently of the carrier equipment for easier setup. A floating bucket curl pin allows the drill to automatically level itself. E-Z Drill; 800-272-0121; www.ezdrill.com
Unknown
The GLM 80 is portable laser distance measure that can also serve as an angle measure. It features a two-axis tilt sensor, which allows the GLM 80 to measure angles when held horizontally or vertically. The combination of the distance and angle measures enable the device to take indirect distance measurements that are normally inaccessible. The GLM 80 is powered by an integrated lithium-ion battery, which can be recharged by a standard micro USB cable. Bosch Power Tools; 877-267-2499; www.boschtools.com
Unknown
The SeeSnake CS-10 Digital Monitor allows for digital recording of video and images from RIDGID SeeSnake pipe inspection cameras. It has a 12.1-in. monitor with enhanced daylight readability, and is powered by an 18-Volt lithium-ion battery. The CS-10 features an auto-log recording feature, which compresses image and video files to save space on the removable USB flash drive. SeeSnake HQ software is included, which allows a user to import video and images easily onto a PC. RIDGID; 800-474-3443; www.ridgid.com
Unknown
The Husqvarna K1260 Power Cutter features a 7.8-hp engine with an active air filtration system which delivers operational times of up to one year dry cutting without needing service. The tool can be used to cut pipe for installation work, concrete and masonry in alteration, renovation and new construction, as well as asphalt in roadwork and pre-cutting for pipe trenches. Husqvarna; 913-928-1000; www.husqvarna.com
Unknown
Hilti S-MS HVAC Zip Screws are designed to fasten sheet metal from 18 to 28 gauge. The screws are self-piercing and can be driven at angles up to 30�. The zip screw has a tapered point and shank for consistent driving and fewer metal filings. The screws are made of galvanized carbon steel and can be used to join up to two layers of 18-gauge steel. The head of the screw is designed to minimize �walking� and stress on the screw from shifts in the joined materials, reducing damage during ductwork installation. Hilti; 918-872-3265; www.hilti.com
Unknown
ENR's weekly rundown of the latest construction products includes an upgraded power cutter that can be used effectively in both asphalt and pipe and a laser distance measure that doubles as an angle measure.
Click the image below for the full slide show.
×