Air compressor: Dual-Flow Design

The XP825/HP750 air compressor is able to deliver air at either 825 cfm at 125 psi or 750 cfm at 150 psi. The air pressure is adjusted by a keypad, allowing the air compressor to work with a variety of tools and applications on the site. It is powered by a Cummins QSB engine that meets Tier 4 Final emissions standards. The engine uses selective catalytic reduction and a diesel oxidation catalyst to meet emissions standards and does not require regeneration cycles.

Doosan Portable Power; 

Excavator: Engine Now Tier 4 Final

The 180G is the largest model in Deere’s new line of G-Series excavators, with an operating weight of 22.5 tons. It has a maximum digging depth of 23 ft and a bucket breakout force of 28,244 lb-ft. Powered by a 128-hp engine that meets Tier 4 Final emissions standards, the excavator’s diesel particulate filter does not require cleaning, working up to 15,000 hours before needing ash removal. Updates to the machine include new hand rails for greater safety when servicing the engine; also, the rearview camera that previously was an option is now standard.

Deere Construction & Forestry;

Bridge-Deck Binder Adhesive: Able To Cure in Low Temperatures

Pro-Poxy Type III DOT LT is an epoxy-urethane binder and adhesive. Designed for use as an overlay binder for bridge deck or as a high-friction surface treatment, the binder can be applied in temperatures as low as 40°F. Once cured, it is fully solid and fully compliant with VOC rules. Pro-Poxy Type III DOT LT meets the ASTM C-881 specification.

Dayton Superior;

Liquid-Paint Markers: New Colors

Milwaukee’s Inkzall liquid-paint markers are now available in a range of new colors. The markers come in white, black, yellow, red, green, blue and orange. Able to write through dusty, wet or oily surfaces, the Inkzall markers are designed for use on structural steel or black pipe. The markers’ weather-resistant ink can withstand temperatures up to 300°F.

Milwaukee Tool;