COMPUTER-AIDED EXCAVATORS
Productivity Through Control
Newly introduced models R210LC-7 and R290LC-7 are equipped with Hyundai's Computer Aided Power Optimization. Improvements to the CAPO system include new mode controls for operator efficiency and a self-diagnostic display system that provides technical information for 48 functions. The cab is completely redesigned. The R210LC-7 has 143 hp and weighs 48,460 lb. It has a maximum digging depth of 22 ft, 1 in. The new 183-hp R290LC-7 weighs 66,270 lb and has a maximum digging depth of 24 ft, 7 in. HYUNDAI CONSTRUCTION EQUIPMENT; 847/437-3333; www.hceusa.com

TRACKING SYSTEM
Features Instant Lock-on
RC-2 FastTrak has wireless, one-touch operation for locking on to the tracking beam of GTS-800AR robotic total stations. Instant lock-on increases jobsite productivity because user does not have to deal with the problem of losing "lock" due to traffic, obstructions and bystanders, says the maker. Weather-proof RC-2 mounts on top of prism or prism pole and is battery-operated. Unit includes remote control, mounting hardware and "Y" cable for communication with data collector. Firm's GTS-800AR series utilizes wide-beam tracking system. TOPCON POSITIONING SYSTEMS INC.; 925/460-1300; www.topcon.com

CRAWLER CRANE
200-ton Lift Capacity
CK2000 lattice boom hydraulic crawler crane features strong lifting capacities with boom and jib configuration, wet-type disc brakes and an optional luffing jib. With an optional, heavy-duty boom attachment, maximum lifting capacity is 400,000 lb. CK2000 is powered by a 316-hp diesel engine. Forced-circulation, oil-cooled, wet-type multidisk brakes are installed in each winch drum. Unit's LMI System displays accurate, real-time information of current load status on a large LCD color screen. Both numerical data and user-friendly graphics are used. KOBELCO CONSTRUCTION MACHINERY AMERICA LLC; 281/240-4800; www.kobelcoamerica.com

2WD OR FWD TRACTOR
High-Performance Features
Three-cylinder, 30-hp TC30 tractor can be customized with a choice of a hydrostatic (automatic) or manual-gear transmission; hydrostatic is standard. High-capacity live hydraulics and a heavy-duty rear axle provide a three-point hitch lift of 1,635 lb. Unit is available with two- or front-wheel drive axle for maximum fuel efficiency in slippery or sandy conditions. A safety system shuts down the engine if the operator attempts to exit the tractor when the transmission is not in neutral and the parking brake is off. NEW HOLLAND, A DIVISION OF CNH GLOBAL N.V.; 717/355-1371; www.newholland.com/na

PLACING BOOM
Requires No Counterweight
The four-section roll-and-fold MXR 34/38 offers a 111-ft horizontal reach and a 13,128-lb boom, which combined provide a greater effective reach and lighter crane picks, says the manufacturer. Unit has a "square" tower with a highly modular design and a special support system that can pour more floors with fewer jumps and offers up to a 46-ft overhang before needing to raise the boom. The absence of a counterweight increases mobility. PUTZMEISTER; 800/884-7210; www.putzmeister.com

AIR COMPRESSOR
Gasoline-powered and Portable
Model AC1-HH04-05M features a 4-hp Honda OHV engine; a single-stage compressor; aluminum crankcase and head with cast-iron cylinder; portable twin tank design; drain valves and pressure release valve; protective pump and motor housing. The powder-coated gasoline tank has a 5-gal capacity. AC1-HH04-05M has a two-handled design for one- or two-person transportation, and also includes safety features. Compact design allows for easy transportation. MI-T-M CORPORATION; 800/553-9053/; www.mitm.com

COMPACT LOADER
Designed for Confined Areas
Model 85 has a 36-in.-wide footprint and a 71.4-in. cab height that allows it to duck under low overhead areas and get at hard-to-reach jobsites. Powered by a 19.8-hp Kubota diesel engine, the loader has an 850-lb lifting capacity and its twin-bucket cylinder design provides 2,200 lb of breakout force. Standard features include an 8-gpm auxiliary hydraulic circuit, cab-operated boom supports and a 40-Amp alternator. A five-year, 5,000-hour warranty is offered. THOMAS EQUIPMENT LTD.; 506/276-4511; www.thomasloaders.com

View more new products from ENR 4/8/200 issue >>