The BP 2900 Bulk Pulverizer Attachment can provide 399 tons of maximum cutting force and and 125 tons of crushing force at its jaw tip. Designed for carriers in the 25-to-35 tonne weight class, it can rotate 360 degrees and has a maximum hydraulic pressure of 5,075 psi. It is designed for light-to-medium building demolition, secondary concrete reduction and material separation. Atlas Copco Construction Tools; 413-746-0020; www.atlascopco.com

The The PTS/PTU Series Tube Heaters are designed for high-heat-loss areas and spot heating such as machine shops and heavy equipment service areas. The heater is fueled by either natural gas or propane, and features fully enclosed power, thermostat and gas connections and for easier maintenance and quieter operation. The system is available in over 100 different configurations designed to fit the needed space. Space-Ray; 800-438-4936 www.spaceray.com

The Model 240B SRA Combo Drill System is a pneumatic concrete core drill that can switch to a rock-drilling configuration. The conversion requires few tools and can be performed at the job site. The core drill requires a minimum of 77 cfm of air for operation, while the rock drill requires 100 cfm. The unit can core and drill holes from 5⁄8-in. dia. up to 2½ in., and can drill up to 18-in. deep. Its compact frame can operate within 6 in. of a corner and does not need to be anchored to the concrete during operation. EZ-Drill; 800-272-0121; www.ezdrill.com

The Titan Hydroseeder allows the spraying of ground materials from up to 320 ft away. Powered by a 170-hp turbocharged diesel engine, the machine’s tank sizes range from 2,500 to 3,600 gallons. The triple-agitator-paddle design allows the Titan to handle tougher material mixtures, such as bonded fibers and heavy mulch. Finn Corp.; 800-543-7166; www.finncorp.com

Designed for both in-place and machine grooving of pipe, the 975 Combo Roll Groover has the capacity to groove 1¼in. to 6-in.-dia. pipe. It can be used on schedule 10 and 40 steel or stainless steel, aluminum and PVC pipe. It has a permanently fixed, depth-setting gauge for quick and simple setup. According to the manufacturer, the groover’s auto-tracking technology keeps pipe engaged on the groove rolls for easier operation. The groover weighs 26 lb and has an integrated cast handle for easy transport to the job site. It’s rugged design includes heavy-duty bearings and heat-treated top plate for extended life. RIDGID; 800-769-7743; www.ridgid.com