The CM 785 surface drill rig is designed to handle 5-meter pipes and can reach a total depth of 129 ft, with holes up to 6.5 ft in dia. The rotary head is able to supply 4,500 lb ft of torque, while the variable airflow can deliver a volume of up to 862 cu ft per minute at 350 psi. It has a cylinder-driven aluminum feed system with a single-piece breakout table for easy maintenance. The superstructure has a ground clearance of 17 in. and full-length rock guards for drilling in rough terrain. Atlas Copco; 720-235-2325; www.atlascopco.com

---

Three D Series mini hydraulic excavators retain the best features of the C Series but have 22% higher bucket breakout forces, 10% higher stick forces and 15% better traction forces. Each machine is powered by a Mitsubishi 4M40 TL engine, rated at 54 hp. The 307D, 308D CR and 308D CR SB have a standard Cat Tool Control System. Caterpillar Inc; 309-494-4100; www.cat.com

---

The Predator Hydraulic Pump is able to power up to four torque wrenches at once. Unlike normal two-stage pumps, the Predator delivers proportional flow as pressure is changed. It features a pendant control with both automatic and manual settings for tightening and loosening, and the pump’s roll-bar design and sealed hydraulic reservoir protect the unit. Available in both air and electric models. Power Team; 800-541-1418; www.powerteam.com

---

The HTC-3140LB hydraulic truck crane has a six-section, 195-ft boom with a maximum boom tip height of 204 ft. It features five boom modes and is able to telescope like a conventional full-power boom. Optional fly attachments include a 10-ft, heavy-lift fly with a capacity of over 20 tons, a bi-fold lattice fly, extensions and counterweights to increase both reach and capability. Metered valve settings allow for precise, slow control of the winches, which have an available line pull of 21,022 lb. Link-Belt Construction Equipment Co.; 859-263-5200; www.linkbelt.com

---

The 11-cu-yd Revolution Composite Drum has a smooth polyurethane interior surface intended to reduce the buildup of concrete during mixing. The interior spiral has 2-in. water channels to ensure concrete does not built up behind the fin. The composite design of the drum makes it at least 2,000 lb lighter than normal steel drums, and it can carry a half-yard more of concrete. McNeilus Truck and Manufacturing Inc.; www.mcneilusconcrete.com; 507-374-6321

---

The BC462EB Soil Compactor has a four-wheel hydrostatic drive and a 255-hp diesel engine. Its fully sealed frame prevents soil from entering the frame or engine and completely protects the drive train. A scraper bar system keeps the wheels free of dirt and debris, while the vehicle’s sheer weight of 51,000 lb provides the main power to compact the soil. BOMAG Americas Inc. 309-853-3571;
www.bomag-americas.com

---

The W 150 Cold Mill can accept a variety of milling drums, allowing it to mill large surfaces, remove pavement layers at full depth or perform leveling. It has a cutting depth of zero to 13 in., and its fourfold, full-floating height adjustment system ensures that it remains level with the road surface. Wirtgen America; 615-501-0600; www.wirtgenamerica.com

---

With a 21-in. true-cut depth and a cut width of 8 ft, 5 in., the SX-7 Soil Stabilizer is able to finish a 24-ft-wide road in only three passes. The design allows for a zero-degree turning radius out of a cut. With a right-hand flush cut, it is able to stabilize or pulverize right up to the curb. Roadtec; 432-265-0600; www.roadtec.com

---

The Allu stabilization method involves the ALLU PM Power Mix, which is a hydraulic accessory for excavators that converts the machines into mixer units. The ALLU PF Pressure Feeder uses compressed air to inject the binding agent beneath the ground directly to the middle of the feeding drum though a pipe. The unit is mounted on a tracked chassis and is remote-controlled to follow behind the excavator. The ALLU DAC Data Acquisition System measures and reports the operation. Clay, peat and sludge can be transformed into solid layers. Allu Group; 800-939-2558; www.allugroup.com

---

The maker’s 100-ton hydraulically actuated Cage pullers are designed to remove large gears, pulleys, wheels and other press-fit parts. The cage holds the jaws in place for increased safety and a power-lift cart enables the puller to be raised up to 5 ft above the floor. Lifting brackets allow the puller to be raised to higher work places. The PH-123T model weighs 2,000 lb and has a spread capacity of 7.5 in. to 70 in. Posi Lock Puller Inc.; 800-533-5761; www.posilock.com