The HIT RE 500-SD Epoxy Adhesive Anchor System is intended for securing standard threaded rods in cracked concrete applications. The system meets the 2003 and 2006 International Building Code standards for strength in post-installed anchors. Able to work in a wide range of temperatures and in any seismic design category, the HIT RE-500 SD can be used in many different hole conditions, including hammer-drilled, diamond-cored, water-saturated, water-filled and underwater holes. Hilti; 800-879-8000; www.us.hilti.com

---

Filtrete Commercial HVAC air filters are intended for commercial construction applications. According to the manufacturer, the filter’s low air resistance can contribute to energy savings and their integral seals aid in reducing air bypass, reducing overall cleaning costs for HVAC systems and occupied spaces. Filtrete filters are designed to fit standard commercial HVAC systems, including rooftop units and PTAC units. 3M; 888-364-3577; www.3m.com

---

Intended for texturing drywall, the Enforcer uses a pressurized tank to feed mud through the gun to ensure constant pressure. With a mud capacity of 2.5 gallons and a variable pressure of 40 to 120 psi, the Enforcer is able to pump 2.31 gallons per minute of mud at a normal viscosity. The tank features a quick-fill plug for easy refilling, and the system is a completely closed unit with no need for cleaning. The Enforcer is able to handle a wide variety of drywall sprays, including orange peel, acoustics, stucco and water-proofing. Marshalltown Co.; 800-888-0127; www.marshalltown.com

---

Flexposts are designed for marking buried cable or pipeline, and their lightweight fiberglass construction allows for a longer service life, even in rough conditions. The posts will spring back into place if run over by a vehicle, and can be combined with SmartMark RFID technology for easy inspection. Each post comes with one or two durable outdoor warning labels with user-customized text. Available in 4-ft, 6-ft and 8-ft versions. William Frick & Co.; 847-918-3700 www.fricknet.com

---

The Firelock Series 747M Zone Control Riser Module is designed for commercial sprinkler systems, and meets NFPA 13 standards and features. These include waterflow switch and alarm connection, pressure gauge, alarm test with orifices to support multiple K factors, drain connections and sight glass. The ductile iron, one-piece design allows for easy installation in either a horizontal or vertical position. Victaulic; 800-742-5842; www.victaulic.com