Davit Crane
Electric Wire Rope Hoist
 |
Drill and Drive
Switch Back and Forth
 |
Core Drill
Hand-Held Model
 |
Rotary Hammer
Chuck Change System
 |
Walk-Behind Concrete Grinder
With Cart
 |
Manufacturer introduces a newly designed material-handling davit crane to meet the U.S. Dept. of Commerce requirements for performance, operation and safety. It features a Columbia HD650 AC electric wire rope hoist and is best suited for material handling and maintenance service applications with long lift distances. Maximum lifting capacity of the APPI Model 4FFM Davit is 400 lb. The Columbia hoist on this unit comes with 115 ft of 5�32-in. wire rope and has an average lifting speed of 25 ft per minute. An upper limit switch and a removable remote pendant control are included. Allied Power Products Inc.; 503/626-0654; This patent-pending concept for drillsthe Twist-Lok drill and drive systemallows users to switch from drill bit to fastening bit and back and forth. The system utilizes common round drill bits and/or hex shank drill bits. Workers can drill a pilot hole then slide the Twist-Lok driver over the drill bit, automatically attaching it to the quick connect chuck. The user never has to remove the drill bit from the drill. LyRoPa Tool Corp.; 610/876-3800; The CDM-1H hand-held core drill is one model in the manufacturers new line of core drilling products that are designed to drill concrete, brick, block, masonry and other materials. This 11-amp, 115-Volt drill operates at 0 to 1,800 rpm and is suitable for many smaller applications, such as electrical and plumbing jobs, where operators need to drill through walls and floors. It also comes with an adjustable shoulder rest and a three-position hand grip. Stow Construction Equipment, a div. of Multiquip Inc.; 877/289/7869; Designed with a patented ClicLoc chuck change system, this new 7�8-in. SDA-plus rotary hammer allows professionals to use one tool to do the job of three in a wide range of applications. Model 11224VSRC offers three mode options. The 6.9-amp unit delivers a 1.6-ft-lb impact force. Bosch Power Tools and Accessories, a div. of Robert Bosch Tool Corp.; 877/267-2499; The EBS 125 walk-behind concrete grinder makes concrete finishing and surface preparation easy. It features a 14-amp motor for handling jobs such as removing epoxy, paint and other coatings. A power outlet on the cart accommodates the grinders plug, allowing the user to activate the grinder by an on/off switch on the carts handle. CS Unitec Inc.; 800/700-5919;
Post a comment to this article
Report Abusive Comment