Solar Panels: Building-Integrated
Solar Panels: Building-Integrated
Solar Panels: Building-Integrated

EnergyPeak is a photovoltaic laminate system that allows photovoltaic panels to be built directly into roofing. The thin, easy-to-apply panels can be factory installed on roofing materials, and are intended to be an integrated element of a project’s design rather than an aftermarket addition. Unlike traditional solar panels, EnergyPeak can produce power in low-light conditions. The system comes in seven predesigned sizes, ranging from 3 kW to 120 kW. EnergyPeak; 888-216-9600; www.energypeak.com


Pipe Rammer: Powerful Punch
Pipe Rammer: Powerful Punch

The TT Pipeliner Package is designed for oil-and-gas pipeline installation projects. It features a 18-in.-dia. pneumatic pipe-ramming system and a bentonite mixing/delivery system. The rammer can drive 24-in. to 56-in. pipe into a wide range of soils with minimal surface slump, and can be used for slick-bore applications as well. TT Technologies; 630-851-8200; www.tttechnologies.com


Green Cement Mix: Composed of Recycled Materials
Green Cement Mix: Composed of Recycled Materials
Green Cement Mix: Composed of Recycled Materials

RediMAXTM Cement is a cement binder technology which consists of 95% recycled waste materials, and is intended as an alternative to traditional portland cement. This “green” cement is designed for all typical construction projects: footings, foundation walls, retaining walls, elevated slabs, etc. It has high early strengths, with 3,000 psi at six hours and a 28 day strength of almost 10,000 psi. While it can be transported and delivered like traditional portland cement, RediMAXTM remains in an unreacted state until a special admixture is introduced. Ceratech; www.ceratechinc.com; 800-581-8397


Non-Sparking Hand Tools: Safer
Non-Sparking Hand Tools: Safer

This line of Non-sparking, Non-magnetic Hand Tools is intended for use in places where hazardous, flammable or combustible vapors, liquids, dust or residues may be present. Their aluminum-bronze or copper-beryllium alloys ensure that the tools will not create dangerous sparks. CS Unitec; 800-700-5919; www.csunitec.com