All Terrain crane: Tier 4 Final Engine
The GMK5150 All-Terrain Crane has a 167-ft, five-segment telescoping boom, with a maximum counterweight of 45 tons. It has a maximum capacity of 175 tons and a maximum tip height of 289 ft. Powered by a single Tier 4 Final engine, the crane comes with a standard 24-ton counterweight. The GMK5150L model sports an extended 196-ft boom. A camera mounted to the boom head is available as an option.
Manitowoc Cranes; www.manitowoc.com


Auger attachment: High-Torque Capability
The Digga Mini Loader Auger has a maximum theoretical torque output of 2,119 ft-lb. The auger can be mounted on a mini loader or compact tool carrier; further, it has an planetary gearbox that can run on auxiliary hydraulic flows between 6 and 16 GPM. The 1MDS2 auger has single-axis, two-way swing capabilities, while the 1MSD4 auger has dual-axis, four-way swing capabilities for applications in which greater maneuverability is required. Digga North America;


Paver: Can Work as a Materials-Transfer Vehicle
The Cedarapids CR662RM RoadMix is able to work as either a materials-transfer vehicle or a paver during road work. It is powered by a 260-hp Cummins diesel engine that meets Tier 4 Final emissions standards. When fully loaded, the CR662 has a ground pressure of only 21 psi, allowing the machine to be used on all paving lifts, including the base layer. A redesigned hopper is able to more aggressively mix the asphalt than earlier models, reducing material segregation. The operator’s platform has been redesigned, as well, improving the operator’s line of sight to the sides of the machine, while a sloped hood improves the view of the hopper. Bomag Americas;


Tile-glass saw: Built-In Water Supply for Wet-Cutting
Makita has expanded its 12V CXT cordless lineup with the CC02R1 33⁄8-in. Cordless Tile-Glass Saw. The compact saw weighs only 4.2 lb when used with a 12V CXT 2.0-amp-hour battery. Able to deliver up to 1,600 rpm, the CC02R1 has a 1-in. cutting capacity at 90° and a 5⁄8-in. cutting capacity at 45°. The saw features a built-in 16.9-oz water-supply tank, allowing for wet-cutting applications and dust control. Makita;