Compact Tractor: Multipurpose Machine The CK27 Series
 |
 |
Articulated Boom: Any Position
 |
Wheel Loader: Maneuverable
 |
 |
Framing Clamp: No Welds
Chicago Clamp Company; 708-343-8311; www.chicagoclampcompany.com |
Cutting Stainless Steel: Quick Snip
RIDGID; 800-769-7743; www.ridgid.com |
Mixing Drum Control Unit: Simple Interface
 |
ompact tractor is designed to get into areas where normal tractors and earth-moving equipment cannot maneuver. The tractors come in either a manual-synchro shuttle-transmission model or with a hydrostatic transmission. They can be used in light construction and landscaping applications, and feature a three-point hitch, joystick loader control and tilt steering. Both are powered by three-cylinder, 28-hp diesel engines. he Rototilt line of boom attachments is designed for excavators and loaders across a wide range of machine weights. The articulated hydraulic attachment fits between the boom and the bucket, and is able to pivot in any direction, with a 360° rotary motion and a 40° tilt motion. The unit has a high torque rating to accommodate the stresses of shifting the load, and allows the operator precise control over the bucket’s position and angle. Features a quick coupler for easy attachment. wheel loader designed to handle a wide variety of jobs, and is well suited for moving sand and gravel. The loader is powered by a 205-hp Cummins QSM 11 engine and features a ZF gearbox and drive axles with limited slip differentials to reduce wheel slip during loading. The loader has a breakout force of 39 kN and a static tipping load of 20.5 tonnes, with an articulation angle of 40° for better handling. The Framing Clamp System is designed for framing roof openings and supporting loads above or below roof decks. With no required welds or special equipment, the system is intended for the fast installation of HVAC equipment, exhaust fans, vents and skylights. The system can be relocated as needed, and can be installed with roof decking in place with a 1,000-lb capacity per-end-clamp. The Model 35S stainless steel pipe cutter features a large X-CEL knob for quick adjustments while its roller bearings reduce friction. Models 227S and 223S have inner-outer reamers featuring 45 and 36 cutting edges respectively for the reaming,deburring and beveling of 1⁄2-in. to 2-in. stainless steel pipe. The Litronic EMC electronic mixing control is designed to work with the entire line of Liebherr truck mixers. The unit has an oversized control lever (below right) to control the mixing drum’s direction of rotation and speed. Once it is set, the unit’s oil-control system regulates diesel engine speed. A button at the top of the lever can slowly stop the rotation, and a memory function can store direction and rotation speed for specific applications. An optional cab-control unit (top right) allows the driver access to all of the control unit’s features, including activating the constant speed drive setting, which maintains a constant slow rotation for for when the vehicle is in motion.
Post a comment to this article
Report Abusive Comment