The Mechanical Super Pro 425 Rider is a riding trowel intended for concrete finishing. Powered by a liquid-cooled, 34-hp gasoline engine with a torque converter clutch, the Rider’s two 46-in.-dia, 5-blade rotors can achieve speeds of up to 170 rpm. It features manual steering and pitch controls for finer control of movements and has an electrically powered spray system for the application of retardant. The flip-up seat and removable screens allow for better access to the engine, clutch and drive-line during maintenance. Allen Engineering Corp.; 870-236-7751; www.allenconquip.com

---

The Boxer 532DX Diesel Mini Skid has an operating capacity of 1,050 lb and is powered by a 32.8-hp diesel engine. The variable track system can retract from its fully extended width of 43.5 in. to 35 in. The unit is powerful enough to use full-size attachments, such as a 36-in. auger or 48-in. trencher. Compact Power Inc; 800-476-9673; www.cpiequipment.com

 

---

Intended for concrete leveling work where small size and maneuverability are required, the Mini Screed is a concrete laser screed that is more compact than comparable models. It weighs in at 352 lb and has a 6-ft head, and is easily transported. The Mini Screed uses a laser tracking system to ensure a level surface on the concrete. As it cuts the finished grade it screeds and vibrates all in one pass. Somero Enterprises; 906-482-7252; www.somero.com

---

The SolARay solar-powered keyless entry system is designed to work with LSX and LSII fiberglass tonneau covers. A thin, weatherproof solar panel is mounted just above the lock, which is connected to a battery pack inside the cover. The keyless entry system is solar-powered and it does not need to be linked with the vehicle’s electrical system or have its batteries changed. The battery can perform 60 locking/ unlockings without recharging. Two key fobs for controls are included. A.R.E.; 800-649-4273; www.4are.com

---

Kwik-Lok Pins are designed to work with equipment where toolless connecting/disconnecting or securing is required. This includes cranes, scaffolding, drilling equipment, hoists and trailer beds. Available in a wide range of sizes including custom dimensions, the positive locking pins are made of stainless or carbon steel and are operated by a simple button interface. Jergens Inc.; 800-537-4367; www.jergensinc.com