Industrial Cranes: Pivoting Boom Head
MManitowoc Crane Group; 717-59305348; www.groveworldwide.com



Utility Vehicle: RapidLink Attachment
TBobcat Co.; 800/823-7898;www.bobcat.com



Utility Loader: Added Torque for Enhanced Performance
EThe Toro Co.; 800-344-8676; www.thetorocompany.com



Soil Stabilizer: 21-in. Deep Cut
DRoadtec, an Astec Industries Co.; 423-265-0600; www. roadtec.com

anufacturer updates its YardBoss industrial crane line with the 22-ton capacity YB7722 and the YB7722XL. They replace models 7720/7720XL. The updated units have a 15-ton deck-carrying capacity and a 15-ton on-rubber capacity. Model YB7722XL has a 67-ft, 5-section boom. The 3-position pivoting boom head allows for operation in areas where headroom is limited. he new 2300 four-wheel drive utility vehicle with the RapidLink attachment system allows the operator to lift loads up to 500 lb as high as 2 ft. The 2300 travels up to 25 miles per hour and is powered by a 20-hp diesel engine. It can be equipped with five specially designed Bobcat attachments, which can be operated and changed from the operator's seat with a joystsick control. quipped with a 25-hp Kubota diesel engine, this wide-track model is designed to deliver more torque for increased pulling and digging force when using attachments in aggressive or rocky conditions, the manufacturer says. The new Dingo TX 525 utility loader weighs 2,127 lb with a standard bucket. It has a rated operating capacity of 553 lb and is compact enough to work in tight places. Featuring four independent hydraulic pumps, the unit delivers 16.9 gallons per minute of flow to each track, 13.8 gpm to the auxiliary and 6 gpm to the loader arm . esigned to work in many types of materials from soil to old pavement, the new Cat-powered, 700-hp SX-7 soil stabilizer features a 21-in. cut depth, the deepest in the industry, says the company. With its right-hand flush cut, the machine pulverizes or stabilizes all the way to the curb line. The cut is 102 in. wide, suitable for three passes on a 24-ft wide road. Torque to the cutter drum is rated at over 500,000 lb-force in. in first gear.