We look at the lastest construction products, including a concrete mixer that delivers mix designs based on weight and a Tier 4i generator with a quieter design. Click on the image to begin the slide show.
Products Snapshot: Weigh-Based Concrete Mixer and Tier 4i Generator
The Metabo W2000 nine-inch Angle Grinder can deliver 9.5 ft-lb of torque and a no-load speed of 6,600 rpm. The angle grinder is powered by a 15-amp motor and can be used for cutting, grinding and sanding applications. The three-position side handle allows the user to turn the tool 90� for vertical cuts. The W2000 is compatible with a variety of Metabo abrasives. Metabo; 800-638-2264; www.metabo.com
Unknown
The TS 420 A STIHL Cutquik Cut-Off Machine is now available with an electronic water-control system for wet-cut operations. The system has a keypad that allows the operator to control the flow of water to the cutting surface; otherwise, the water flow stops at idle speeds and starts when the throttle is engaged. The electronic control can retain the last used water settings. STIHL; 800-467-8445; www.stihlusa.com
Unknown
The Maxon Techcrete truck-mounted mobile concrete mixer has a continuous component weighing system featuring load cells that allow the mixer to produce concrete by weight instead of volume. The Techcrete meters each component into the mixing auger by weight and is able to adjust to suit the preset mix design. The mixer can handle a wide range of mix designs, from flowable fill to high-strength concrete. Maxon Industries; 414-351-4000; www.maxon.com
Unknown
Doosan Infracore Portable Power's G325 Mobile Generator is Tier 4 Interim-compliant. The generator's enclosure incorporates the power train and cooling system into separate compartments to reduce overall noise levels. The voltage selector switch covers the most common voltages and also prevents voltage switching during operation. Doosan Infracore Portable Power; 770-831-2200; www.doosanportablepower.com
Unknown
Post a comment to this article
Report Abusive Comment