This week we look at a new crawler crane from Link Belt and a fall-safety lanyard from Capital Safety. Click to begin the slide show.
Product Snapshot: Crawler Crane and Fall-Safety Lanyard
The latest Sioux Water Heater models have been updated with several much-requested features. Gas-fired water heaters now sport gas-pressure gauges on the inlet of the gas train, with a label clearly stating the required flow of gas and operating pressure. Oil-fired water heaters now feature oil-pressure gauges on the burner fuel oil pump, also with a label stating the required fuel pressure. These new standardized gauges and labels minimize problems during installation, operation and troubleshooting. All M Series, PWP Series and M-415 Series water heaters now include digital temperature-control systems in the main electrical enclosure; this setup allows the operator to monitor the inlet water temperature and control the desired set-point temperature. The water heaters are pre-wired and pre-plumbed for easier installation and offer instantaneous, continuous hot-water supply with no preheating or recovery time needed. Sioux Corp.; 888-763-8833; www.sioux.com
Unknown
The DBI-SALA EZ-Stop Lanyard has a modular design that allows for the replacement of individual components as they become worn. The shock pack is more compact than earlier models and has a 3/4-in. webbing that reduces its weight and bulk. The lanyard features a one-handed, quick-connect design that employs a dual-action locking gate rated to 3,600 lb. Water-repellent webbing reduces the build up of mold and dirt for better abrasion resistance. Capital Safety; 800-328-6146; www.capitalsafety.com
Unknown
The 248 HSL is designed for work such as bridge building, steel erection and pile driving. Powered by a 282-hp Tier 4 Interim engine, the 200-ton lattice-boom crawler crane can be fitted with a main boom of 55 ft to 285 ft and a fixed jib ranging from 30 ft to 100 ft; the maximum tip reaches 345 ft. When lifting light loads, a selectable eco mode keeps engine speeds under 1,000 rpm without sacrificing line speed. Link-Belt Construction Equipment Co.; 859-264-6246; www.linkbelt.com
Unknown
The Hilti TE 2-A18 Rotary Hammer-Drill is designed for drilling anchor holes and drilling through holes in concrete, brick and block. The rotary hammer-drill has an optimum drilling diameter range of 3/16 in. to 3/8 in.The TE 2-A18 is comparable in weight tothe corded Hilti model. The tool's glass-fiber composite housing is damage-resistant.A built-in LED illuminates the work space.Hilti is offering unlimited battery replacement for two years with the purchase of this cordless tool. Hilti; 918-872-3265; www.hilti.com
Unknown
Post a comment to this article
Report Abusive Comment