Deadly falls. Lethal electrocutions. Being crushed or caught between objects. Being struck by moving machinery or objects.

 

Those may sound like chilling scenes from the latest Final Destination sequel, but in fact, those four types of accidents are the leading causes of death in the construction industry, according to the Occupational Health and Safety Administration (OSHA). In response to a recent OSHA training mandate, MANCOMM, a national safety and compliance publisher, has released two related publications which address the top four construction industry hazards.

"OSHA now requires a module on these four hazards to be used in both 10- and 30-hour construction outreach courses," said Benjamin Mangan, President of MANCOMM. "MANCOMM approves wholeheartedly of the initiative and has developed two new training resources, Construction Focus 4: Instructor Guide and Student Handbook, that make it easy for safety trainers to provide their trainees with this vital information."

 

In 2010, 751 members of the construction industry died from work-related injuries, according to the Bureau of Labor Statistics (BLS). "Lowering the accident and injury rates for the four main jobsite hazards through enhanced training," Mangan said, "would do much to reduce accident statistics throughout the construction industry."

 

Four Life-Saving Lessons

According to Mangan, the content for Construction Focus 4 is divided into four sections – one for each of the major construction industry hazards:

 

Lesson 1: Fall Hazards

"The Fall Hazards section is especially important," Mangan said, "because jobsite falls are a severe, chronic problem in the construction industry." According to OSHA, falls from heights are the leading cause of fatalities in construction, while falls on the same level are one of the leading causes of injuries.

In 2010, falls accounted for 35 percent of all construction fatalities, or about 260 deaths, according to the BLS.

 

Lesson 2: Caught-In or -Between Hazards

According to OSHA, "caught-in or -between hazards" are defined as: "Injuries resulting from a person being squeezed, caught, crushed, pinched, or compressed between two or more objects, or between parts of an object."

 

Accidents that would be classified by OSHA as Caught include:

· Trench cave-ins.

· Being pulled into or caught in machinery and equipment.

· Being compressed or crushed between rolling, sliding, or shifting objects.

 

Lesson 3: Struck-By Hazards

“Struck-by hazards” are defined by OSHA as: "Injuries produced by forcible contact or impact between the injured person and an object or piece of equipment."

 

To make a determination between Caught and Struck accidents, OSHA notes that one must ask: "Was it the impact of the object alone that caused the injury?" If impact alone created the injury, it would be considered as Struck. If the injury was more the result of being crushed between objects, it would be considered as Caught.

 

Lesson 4: Electrocution Hazards

According to OSHA, "Electrocution results when a person is exposed to a lethal amount of electrical energy." An electrical hazard can be defined as a workplace occurrence that exposes workers to the following dangers, as outlined by the acronym BE SAFE: Burns, Electrocution, Shock, Arc Flash/Arc Blast, Fire, Explosions.


"T
he Construction Focus 4: Instructor Guide and Student Handbook provide the construction industry with the knowledge needed to foster safer work practices," Mangan said. "More importantly, they will help to prevent tragic accidents and deaths on jobsites nationwide."

 

For more information on the Construction Focus 4 publications, visit www.Mancomm.com/focusfourinstructorguide.aspx. For more information on MANCOMM, call 1-800-MANCOMM (626-2666) or visit Mancomm.com.