Jobsite work lamps: Brighter Outlook and more new products
The FCS5 Rip-R-Stripper Series is a line of handheld surface preparation tools designed for scraping floor covering in confined spaces. The corded FCS5AC model (far right) has a 1.2-hp motor, operates at 3,000 oscillations per minute, and is powered by a standard 115-Volt power source. The FCDS5DC (near right) is powered by a rechargeable 18-Volt battery and has a cut rate of 2,400 oscillations per minute. Both are designed for removing tile, linoleum, various mastics and rubber-backed carpet. General Equipment Co.; 877-344-4375; www.generalequip.com
The Model 110B (left) and 210B-2 (right) are pneumatic, on-grade concrete drills. The units are designed to work on level subgrade, and are suitable for airport work, lane additions and large patchwork jobs. The 210B-2 is designed to drill standard 18-in. depth holes, and can drill a 9-in., 3⁄4-in.-dia. hole in only 15 seconds. The 210B requires 200 cfm of air for power and has an operating footprint of 4 ft. The 110B is capable of drilling holes up to 12-in. deep from 5⁄8 to 2 in. dia. At 170 lb, the smaller 110B requires only 3 ft of work space and 50 cfm of air. E-Z Drill; 800-272-0121; www.ezdrill.com