This week we look at an articulated dump truck from Doosan and a tandem vibratory roller from Bomag. Click on the image to begin the slide show.
Product Snapshot: Articulated Dump Truck and Vibratory Roller
The Xi Plus Insulated Precast Concrete Wall system features Dow Thermax reinforced polyisocyanurate insulating covering. The system has a 4-in. insulated footer beam that allows for a 4-in. standard concrete floor slab to be poured, eliminating the need for a separate screed board. The panels can be custom-designed to suit the needs of the project. Xi Plus panels have a built-in insulation value of R-21.3 and can be insulated up to R-42. Superior Walls; 800-452-9255; www.superiorwalls.com
Unknown
The Doosan DA30 Articulated Dump Truck is powered by a 365-hp, six-cylinder, Interim Tier 4 diesel engine. Its sloping design and low center of gravity enhance stabilit, enabling faster dumping. It has permanent six-wheel drive, and the articulation hinge is located behind the turning ring for even weight distribution. The truck has a payload rating of 31 tons and a heaped capacity of 23.3 cu yd. The DA30 has independent suspension, with hydraulic shock absorbers, rubber springs on each side and no rigid axle. Doosan Infracore; 770-831-2200; www.doosaninfracore.com
Unknown
The Bomag BW138AD-5 Tandem Vibratory Roller is powered by a 44.6-hp Interim Tier 4 diesel engine that delivers a maximum centrifugal force of 10,800 lb. It has dual vibration frequencies of 3,480 or 2,820 vibrations per minute. It has a working width of 54.3 in. A bolt-on oscillating and articulating joint allows the rear drum to follow the front during turning. Bomag Americas; 800-782-6624; www.bomag.com
Unknown
The Makita Cordless Multi-Tool Kit is powered by an 18-volt lithium-ion battery and delivers up to 15 minutes of continuous run time on a single charge. The multi-tool has a variable speed of 6,000 to 20,000 rpm. It features a 3.2� oscillation angle and a built-in LED to illuminate the work area. It has a large on/off switch with a lock-on button as well as a clamp system and adapter that fit most commonly available accessories. The multi-tool kit comes with two batteries, a charger and an assortment of 14 cutting and sanding accessories. Makita; 800-462-5482; www.makitatools.com
Unknown
Post a comment to this article
Report Abusive Comment